watchdog/watchdog.spec
Name: watchdog
Summary: Software watchdog
Version: 5.4
Release: 1
License: GPL
Group: System Environment/Daemons
URL: http://sourceforge.net/projects/watchdog/
Description: watchdog is a software watchdog.
CentOS 7 x86_64
The build could not start because the following file is missing: watchdog_5.4.tar.gz
CentOS 6 x86_64
The build could not start because the following file is missing: watchdog_5.4.tar.gz
Contents
The spec file used by the build system currently has the following contents:
# $Id$
# Authority: dag
### EL6 ships with watchdog-5.5-7.1.el6
### EL5 ships with watchdog-5.6-1.el5
# ExclusiveDist: el2 el3 el4
Summary: Software watchdog
Name: watchdog
Version: 5.4
Release: 1%{?dist}
License: GPL
Group: System Environment/Daemons
#URL: http://oss.digirati.com.br/watchcatd/watchdog.html
URL: http://sourceforge.net/projects/watchdog/
#Source: http://ftp.debian.org/debian/pool/main/w/watchdog/watchdog_%{version}.orig.tar.gz
#Source: http://www.ibiblio.org/pub/Linux/system/daemons/watchdog/watchdog-%{version}.tar.gz
Source: http://dl.sf.net/watchdog/watchdog_%{version}.tar.gz
BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root
%description
watchdog is a software watchdog.
%prep
%setup
### FIXME: Make it compile on RH80, RH9, RHEL3 and RHFC1. (Fix upstream please)
%{?fc1:%{__perl} -pi.orig -e 's| __GNUC__ == 2 && __GNUC_MINOR__ >= 5| __GNUC__ >= 2|' include/sundries.h}
%{?el3:%{__perl} -pi.orig -e 's| __GNUC__ == 2 && __GNUC_MINOR__ >= 5| __GNUC__ >= 2|' include/sundries.h}
%{?rh9:%{__perl} -pi.orig -e 's| __GNUC__ == 2 && __GNUC_MINOR__ >= 5| __GNUC__ >= 2|' include/sundries.h}
%{?rh8:%{__perl} -pi.orig -e 's| __GNUC__ == 2 && __GNUC_MINOR__ >= 5| __GNUC__ >= 2|' include/sundries.h}
### FIXME: Fix the errno problem on RH9. (Fix upsteam please)
%{?rh9: %{__perl} -pi.orig -e 's|^(#include <linux/unistd.h>)$|$1\n#include <errno.h>|' src/quotactl.c}
%{__cat} <<EOF >%{name}.sysconfig
### Controls the behaviour of the watchdog
###
### -v verbose mode
### -s sync filesystem
### -b softboot
### -f force internal defaults
### -q test-run, no action taken
#OPTIONS="-v"
EOF
%{__cat} <<'EOF' >%{name}.sysv
#!/bin/bash
#
# Init file for Software Watchdog daemon.
#
# Written by Dag Wieers <dag@wieers.com>.
#
# chkconfig: 2345 02 98
# description: Software Watchdog Daemon
#
# processname: watchdog
# config: %{_sysconfdir}/watchdog.conf
# pidfile: %{_localstatedir}/run/watchdog
source %{_initrddir}/functions
[ -x %{_sbindir}/watchdog ] || exit 1
[ -r %{_sysconfdir}/watchdog.conf ] || exit 1
### Default variables
SYSCONFIG="%{_sysconfdir}/sysconfig/watchdog"
OPTIONS="-v"
### Read configuration
[ -r "$SYSCONFIG" ] && source "$SYSCONFIG"
RETVAL=0
prog="watchdog"
desc="Software Watchdog daemon"
start() {
echo -n $"Starting $desc ($prog): "
### For some people it is a module, for others not. We force it because
### for kernels < 2.1, we need kerneld, and it's not running yet.
modprobe softdog &>/dev/null
modprobe pcwd &>/dev/null
modprobe acquirewdt &>/dev/null
daemon $prog $OPTIONS
RETVAL=$?
echo
[ $RETVAL -eq 0 ] && touch %{_localstatedir}/lock/subsys/$prog
return $RETVAL
}
stop() {
echo -n $"Shutting down $desc ($prog): "
killproc $prog
### If you compiled your kernel with CONFIG_WATCHDOG_NOWAYOUT, you may
### not want to remove the module as sometimes /etc/rc.d/init.d/halt
### will hang on umounting some remote nfs partition or for some other
### reason, and you may then want the kernel to reboot by itself.
### However, this means that if you stop watchdog, your system has one
### minute to reboot cleanly, or it will be rebooted by the kernel. If
### this behavior isn't what you want, just uncomment the following
### lines
#rmmod softdog &>/dev/null
#rmmod pcwd &>/dev/null
#rmmod acquirewdt &>/dev/null
RETVAL=$?
echo
[ $RETVAL -eq 0 ] && rm -f %{_localstatedir}/lock/subsys/$prog
return $RETVAL
}
restart() {
stop
start
}
case "$1" in
start)
start
;;
stop)
stop
;;
restart|reload)
restart
;;
condrestart)
[ -e %{_localstatedir}/lock/subsys/$prog ] && restart
RETVAL=$?
;;
status)
status $prog
RETVAL=$?
;;
*)
echo $"Usage: $0 {start|stop|restart|condrestart|status}"
RETVAL=1
;;
esac
exit $RETVAL
EOF
%build
%configure
### FIXME: Fix to use standard autotool directories. (Fix upstream please)
%{__perl} -pi.orig -e 's| /etc/| \$(sysconfdir)/|' Makefile
%{__make} %{?_smp_mflags}
%install
%{__rm} -rf %{buildroot}
%{__install} -d -m0755 %{buildroot}%{_sysconfdir}
%{__make} install DESTDIR="%{buildroot}"
%{__install} -Dp -m0644 %{name}.sysconfig %{buildroot}%{_sysconfdir}/sysconfig/watchdog
%{__install} -Dp -m0755 %{name}.sysv %{buildroot}%{_initrddir}/watchdog
%post
/sbin/chkconfig --add watchdog
%preun
if [ $1 -eq 0 ]; then
/sbin/service watchdog stop &>/dev/null || :
/sbin/chkconfig --del watchdog
fi
%postun
/sbin/service watchdog condrestart &>/dev/null || :
%clean
%{__rm} -rf %{buildroot}
%files
%defattr(-, root, root, 0755)
%doc AUTHORS ChangeLog COPYING examples/ IAFA-PACKAGE NEWS README TODO watchdog.lsm
%doc %{_mandir}/man5/watchdog.conf.5*
%doc %{_mandir}/man8/watchdog.8*
%config(noreplace) %{_sysconfdir}/watchdog.conf
%config(noreplace) %{_sysconfdir}/sysconfig/watchdog
%config %{_initrddir}/watchdog
%{_sbindir}/watchdog
%{_sbindir}/wd_keepalive
%changelog
* Fri Aug 17 2007 Dag Wieers <dag@wieers.com> - 5.4-1
- Updated to release 5.4.
* Thu Feb 22 2007 Dag Wieers <dag@wieers.com> - 5.3.1-1
- Updated to release 5.3.1.
* Mon Apr 24 2006 Dag Wieers <dag@wieers.com> - 5.2.5-1
- Updated to release 5.2.5.
* Mon Mar 29 2004 Dag Wieers <dag@wieers.com> - 5.2-7
- Fixed missing statement in %preun. (Matthew Lenz)
* Wed Jan 28 2004 Dag Wieers <dag@wieers.com> - 5.2-6
- Register sysv script with chkconfig.
* Tue Sep 09 2003 Dag Wieers <dag@wieers.com> - 5.2-5
- Embedded sysconfig and sysv script.
- Fixes for building on RH9.
* Tue Dec 31 2002 Dag Wieers <dag@wieers.com> - 5.2-4
- Init script should be a config file.
* Sun Aug 26 2001 Dag Wieers <dag@wieers.com> - 5.2-0
- Initial package.